warning( 'Only "logo" channel supported for this device, falling back to that') warning( 'Speed must be a value between 1 and 255, setting to 1') : Operation timed outĭef set_color( self, channel, mode, colors, speed): Report: failed to (pre) open (control: open), sudo liquidctl status Report: failed to (pre) open (control: open), ignoring But you can also use pip:ĭevice 0, Asetek 690LC (NZXT, EVGA or other) (experimental) The recommend way to experiment with this is directly through git, since you'll have easier access to inspect and modify the code.
Additionally, since aesthetics are the main difference between the various flavors of the base model, this might also cause the status command to fail on the EVGA devices. Setting the LEDs is not possible for now, as command for it is currently being used to trigger status responses from the cooler.
possibly allowing custom fan curves based on liquid temperature, running directly on the device.setting fan and pump speeds independently of each other, at different times, and without resorting to a daemon.minimal interference for getting the cooler's status.If that's the case, please let us all know and you can install a suitable driver with Zadig. But this should only be the case if the device doesn't already use the Microsoft HID one. If you need to reset the controller for some reason, just power off the device (or the computer) completely, ensuring no USB power (even standby) is available to the cooler.įinally, if you're on Windows, you might need a different kernel driver (in addition to the libusb runtime libraries). While debugging or submitting error reports, consider using -debug it will dump a bunch of useful (or less so) information, including all libusb calls. Variable fan speed: liquidctl set fan speed.Fixed independent speeds: liquidctl set speed.Fixed combined speed: liquidctl set sync speed.I suggest trying features in the following order: branch add-second-gen-krakens – and report back. Please test/debug the changes in this pull request – i.e. NZXT Kraken X31, X41 or X61 ( NZXT Kraken X61 #3).
This is the current state on supporting (other) "bare" 5th generation Asetek coolers like the EVGA CLC 120 CL12, 240 and 280 ( #16):
0 kommentar(er)
